Digital Impact Testing Machine
Digital Impact Testing Machine
We at TestCraft are Manufacturer, Supplier, Exporter of Analogue Impact Testing Machine, Digital Impact Testing Machine. Our setup is situated in Ichalkaranji, Maharashtra, India and majorly we serve customers from African and Gulf countries.
- Technical Specifications
- Capacity: Charpy: 300 Joule, Izod: 170 Joule
- It conforms to BS EN ISO 148,IS 3766-1977, IS 1598-1977, IS 1757-1988, IS 1499-1977 (for Charpy) & BS 131 Part!, II, III, IV (for lzod) current standard.
- Indirect verification with the help of ERM samples can be carried out.
- Direct inciication of impact energy absorbeci by the specimen on digital display unit. (Analogue dial is optional.)
- New modified Brake drum unit is provided to stop the pendulum swing instantly after test.
- Safety guard is provided for operator safety.
General Description
The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy the lower one for Izod testing. On release, the pendulum swings down to break the specimen & the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on the digital readout in case of electronic machines). There are two strikers and one combined support anvil available for fitting into the pendulum and on the base of the machine for the Izod, Charpy test respectively. Changing from one striker to another is achieved simply by fixing the new striker into its position.
Charpy Test
The Charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. An end stopper is provided for quickly and accurately locating the test piece centrally between the supports.
Izod Test
The Izod test piece is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece incorrect height with the help of the Izod setting gauge supplied.
Standard Accessories
- Charpy Striker R 2 mm - 1 No
- Izod Strike R 0.75 mm - 1 No.
- Charpy - Izod support Block - 1 No.
- Specimen setting Gauges for Charpy & Izod - 1 Each.
- Allen key Set - 1 set.
- Instruction Manual - 1 No.